Ihr Warenkorb ist leer
 

DFRobot mega2560 V2.0 (Arduino mega 2560 R2 compatible)

42.00EUR
inkl. 19% MwSt.
zzgl. Versandkosten

Der DFRduino Mega V2.0 ersetzt die Vorgängerversion DFR0127 und nutzt nun auch den 8u2 zur USB Ansteuerung genau wie Arduino Mega 2560. 

DFRduino Mega 2560 V2.0 kompatibel zu Arduino Mega 2560.

 

Introduction

This is the DFRduino Mega 2560 V2.0. It is fully compatible with Arduino Mega 2560 R2. This board features the ATmega8U2 programmed as a USB-to-serial converter and it has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU.
The cool thing about our new DFRduino microcontroller is that the hearders with different colors are used to feature I/O ports of different types, red for Power Section, blue for Analog I/O, green for Digital I/O. These colors match our sensor cables. This makes it really easy to figure out where to connect sensors.
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
The Arduino Mega is a microcontroller board based on the ATmega1280/2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove, Diecimila or Uno.
 
 
Specifications
  • compatible with Arduino Mega 2560 R2
  • Microcontroller: ATmega2560
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Digital I/O Pins: 54 (of which 14 provide PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 256 KB of which 8 KB used by bootloader
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz
  • The Mega is compatible with:
    • Arduino Mega Prototype Shield
    • Arduino Mega Expansion Shield
    • Arduino I/O Shield
    • Arduino LCD Shield
    • Arduino Motor Shield
    • 2A Motor Shield for Arduino
    • Screw Shield for Arduino
    • Arduino Input shield
    • Arduino Xbee Shield
    • DFRduino Ethernet Shield (Support Mega and SD)
    • Power Shield
    • Proto Screw Shield
    • DFRduino GPS Shield
    • Relay Shield
    • USB Host shield
    • Graphic LCD4884 Shield For Arduino
    • WIFI Shield For Arduino (802.11 b/g)
    • Mega Prototyping Shield
    • IO Expansion Shield For Arduino(V5)
 
Shipping list
  • DFRduino Mega 2560 V2.0 (1 Units)
 
Documents

Anzahl:

  • Artikelnummer: DFR0191
  • Gewicht: 0.05kg
  • 1 Stück auf Lager
  • Hergestellt von: DFRobot


Dieser Artikel wurde am Freitag, 03. August 2012 im Shop aufgenommen.

 
     
Find us on Facebook PayPal Accepted

Copyright © 2024 komputer.de. Powered by Zen Cart