L298 Shield 2A High-Power-H-Brücken DC-Motor Treiber (Arduino-kompatibel)
Treiberchip LGS L298P, direkter Antrieb DC-Motoren, zwei-Phasen-, Vier-Phasen-Schrittmotoren,
max 2A Motorleistung
Acht High-Speed-Schottky-Schutzdioden on Board
Motorspannung per Schalter wählbar über Schraubklemmen oder Arduino (VIN)
Technische Daten:
Spannung Logikteil: 5V
Spannung Motortreiber: 4,8 -35V
Max Strom: 2A
Maximale Verlustleistung: 25W (T = 75 CA
Control-Signal-Eingangspegel: High: 2.3V ≤ Vin ≤ 5V Low: 0.3V-1.5V ≤ ≤ Vin
Betriebstemperatur: -25°C - 130°C
Description
This Freaduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanoveand Arduino Mega.
The speed control is achieved through conventional PWM which can be obtained from Arduino’s PWM output Pin 5 and 6. The enable/disable function of the motor control is signalled by Arduino Digital Pin 4 and 7. The Motor shield can be powered directly from Arduino or from external power source. It is strongly encouraged to use external power supply to power the motor shield.
Feature
- Logic Control Voltage：5V (From Arduino)
- Motor Driven Voltage：6.5~12v(VIN Power Supply),4.8~35V (External Power Source)
- 2 way motor drive
- Logic supply current Iss：≤36mA
- Motor Driven current Io：≤2A
- Maximum power consumption：25W（T=75℃）
- Up to 2A current each way
- Pin 4,5,6,7 are used to drive two DC motor
- Support PWM speed control
- Support PLL advance speed control
- Size: 51x57mm
Documents:
Please visit the ElecFreaks wiki pagefor more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials.
Dieser Artikel wurde am Dienstag, 19. Februar 2013 im Shop aufgenommen.
