Ihr Warenkorb ist leer

GPRS/GSM Module-EFCom Pro

inkl. 19% MwSt.
zzgl. Versandkosten




GSM Modul auf Basis des bekannten SIM900 Quad-band GSM/GPRS Bausteins. Antenne wie abgebildet und Messing Abstandhalter sind im Lieferumfang.



If you need GPRS Shield, please purchase EFCom

4 Frequency GPRS/GSM Module-EFCom Pro is an ultra compact and reliable wireless module. It is a breakout board and minimum system of SIM900 Quad-band GSM/GPRS module. It can communicate with controllers via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). This module support software power on and reset. 
EFCom Pro is base on SIM900 4 Frequency GPRS module. 

The GPRS is configured and controlled via its UART using simple AT commands. Just connect on the Arduino/AVR/ARM/FPGA/CPLD board, you could easily use AT command to control it. EFCom Por can be connected to PC via FT233RL

EFCom Pro IO List:GND , +5V , RX , TX , PWR , RST .


  • Power Supply: +5V
  • Fully compatible with AVR/Arduino/ARM/FPGA
  • Free serial port connecting, you can select Hardware/Software Serial port control
  • Super capacitor power supply for the RTC.
  • EFCom not only can use the button for power on , but also can use the digital pin of Arduino to power on and reset the SIM900 module.
  • Quad-Band 850/ 900/ 1800/ 1900 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+ 
    - Class 4 (2 W 850/ 900 MHz)
    - Class 1 (1 W 1800/1900MHz)
  • Control via AT commands (GSM 07.07 ,07.05 and EFCOM enhanced AT Commands)
  • Supply voltage range : 3.1 - 4.8V
  • Low power consumption: 1.5mA(sleep mode)
  • Dimension:60 mm x 53 mm


Order List:

  • 1 x GPRS Module -EFCom Pro
  • 1 x 4 Frequency Antenna
  • 4 x Copper Cylinder



  • Artikelnummer: EF03045
  • 3 Stück auf Lager
  • Hergestellt von: ElecFreaks

Dieser Artikel wurde am Mittwoch, 06. April 2016 im Shop aufgenommen.

Find us on Facebook PayPal Accepted

Copyright © 2021 komputer.de. Powered by Zen Cart