Ihr Warenkorb ist leer
 

FireBeetle ESP32-E IoT Microcontroller GDI

10.70EUR
inkl. 19% MwSt.
zzgl. Versandkosten

 

 

 

 

FireBeetle ESP32-E  Microcontroller Board mit ESP-WROOM-32E und GDI Port für direkten Anschluss eines Displays

 

Introduction

FireBeetle ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips.

It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power consumption, on-board charging circuit and easy-to-use interface, which can be conveniently used for smart home IoT, industrial IOT applications, wearable devices and so on. You can easily create your own IoT smart home system when connecting it with an IoT platform like IFTTT.

FireBeetle ESP32-E supports Arduino programming, and will support Scratch graphical programming and MicroPython programming very soon. We provide you with detailed online tutorials and application cases, and there are thousands of sensors with welding-free Gravity interface and actuators to help you get started easily. Besides, the stamp hole design makes it able to be easily embedded in your PCB, greatly saving your costs and time to build and test prototype.

We sell two versions of Firebeetle ESP32-E, unsoldered version and with header version. If you want to plug the firebeetle shield to your firebeetle mainboard, the Firebeetle Board ESP32-E(Pre-soldered) is better for you.

 

Features

  • ESP32 Dual-core low power maincontroller, 10uA power consumption
  • WiFi+Bluetooth 4.0 Dual-mode Module
  • GDI Display Port, easy to connect
  • Onboard Charging Circuit and PH2.0 lithium Battery Interface

Specification

  • Operating Voltage: 3.3V
  • Input Voltage: 3.3V~5.5V
  • Support Low-Power: 10uA
  • Max Discharge Current: 600mA@3.3V LDO
  • Max Charge Current: 500mA
  • Support USB Charging
  • Processor: Tensilica LX6 dual-core processor (One for high-speed connection; one for independent application development)
  • Main Frequency: 240MHz
  • SRAM: 520KB
  • Flash: 4MB
  • Wi-Fi Standard: FCC/CE/TELEC/KCC
  • Wi-Fi Protocol: 802.11 b/g/n/d/e/i/k/r (802.11n,speed up to 150 Mbps), A-MPDU and A-MSDU Aggregation, support 0.4us guard interval)
  • Frequency Range: 2.4~2.5 GHz
  • Bluetooth Protocol: Bluetooth v4.2 BR/EDR and BLE standard compliant
  • Bluetooth Audio: CVSD and SBC audio
  • Operating Current: 80mA(Average)
  • Support Arduino download with one-key
  • On-chip Clock: 40MHz crystal, 32.768KHz crystal
  • Digital I/O x10(Arduino default)
  • Analog Input x5(Arduino default)
  • SPI x1(Arduino Default)
  • IIC x1(Arduino Default)
  • I2S x1(Arduino Default)
  • RGB_LED: 5/D8
  • Connector: FireBeetle V2 series compatible
  • Operating Tempeature: -40℃~+85℃
  • Module Size: 25.4×60mm/1×2.36”
  • Mount Hole Size: inner diameter of 2.0mm

Documents

Shipping List

  • FireBeetle Board ESP32-E with Header x1
  • 18pin-2.54mm Pitch Pin x1
  • 18pin-2.54mm Pitch Pin Female x1
  • 14pin-2.54mm Pitch Pin x1
  • 14pin-2.54mm Pitch Pin Female x1

Anzahl:

  • Artikelnummer: DFR0654-F
  • 7 Stück auf Lager
  • Hergestellt von: DFRobot


Dieser Artikel wurde am Donnerstag, 15. April 2021 im Shop aufgenommen.

 
     
Find us on Facebook PayPal Accepted

Copyright © 2021 komputer.de. Powered by Zen Cart